- Home /
- Consumables /
- Corrosion Protection /
- TERGO TERGOSTRIP 500ML
Shop Now
- Sealants
- Service Items
- Chemicals
- Cleaners / Polish
- Consumables
- Hand Tools
-
Fasteners
- Metric Set Screws Stainless
- Imperial Set Screws Stainless
- Imperial Hex Bolts Stainless
- Metric Hex Bolts Stainless
- Imperial Cap Screws Stainless
- Metric Cap Screws Stainless
- Imperial Countersunk Stainless
- Metric Countersunk Stainless
- Metric Countersunk Allen Head Stainless
- Metric Pan Slot Stainless
- Imperial Button Head Bolts Stainless
- Metric Nuts & Washers Stainless
- Metric Button Head Bolts Stainless
- Self Tapping Screws Stainless
- Misc Fasteners Stainless
- Threaded Rod Stainless
- Cutting Tools
- Power Tools
- Lubricants & Oils
- Health & Safety
- Welding / Heat
- Hoses & Clamps
- Toolboxes
- Misc Items
- Abrasives
- Fittings & Valves
TERGO TERGOSTRIP 500ML
Description
Removes epoxy paints, powder coatings polyurethanes, acrylic enamels, anti-fouling, conventional air-dry and baked alkyds. Contains Phenol.
Instructions for use:
Ensure adequate protective clothing such as gloves, overalls and safety glasses are used. Indoor use requires good ventilation. Do not apply to hot surfaces or in direct sunlight.
Open container cautiously to release pressure and begin application by spraying with non-atomising airless spray equipment or by daubing with a brush. Allow to dwell until paint is loosened and remove with a strong jet of water (avoid back splatter). Alternatively scrape off wrinkled film with a paint scraper and collect removed paint and stripper in newspaper.
Tergostrip Brush On contains a wax evaporation retarder, therefore wipe stripped surfaces with a rag soaked in mineral turpentine or xylol prior to repainting.
Coverage: 2-4 square metres per litre.